JMT Kéntro Chassis Kits for LMT Build

https://fb.watch/5JnSxNg6EE/

The JMT Kéntro chassis is Made with 3mm thick 5052 Aluminum and Anodized Black. This chassis is designed as a direct bolt on chassis for the Stock LMT allowing for you to keep the stock mounting locations of ALL the stock components from the LMT kit. This kit will give you the ability to utilize the stock LMT setup.

-This chassis also allows for the use The Stock LMT chassis wings, cage and body while allowing you to convert the drivetrain into a center drop box transmission (Freestyle RC Trans) To marry the trans to the drive shafts you will just need to drill out the trans output shaft holes to 3mm to allow the LMT drive shaft pins to drop right in.

-Also available are the Trident Trailing arms for the LMT stock replacements giving you the ability to have link mounted shocks for more adjustability and tuning of your suspension. https://jercustomdesigns.com/product/trident-trail...

-If you are wanting to run your Favorite JConcept wheels and tires on your LMT you can do so with the 17mm Flower Pot Hub Spacers. https://jercustomdesigns.com/product/flower-pot-wh...

*** Kit Sold as such: Chassis plates (In Black) Trans mounting plate and bridge support, 6 cross members with hardware to put where needed. Optional sway bars and trialing arms may be purchased as well.

#jerrc #jercustomdesings #trident #iso #perseschassis #apepchassis #swaybars #trailingarms #JMT #JMTChassis #LMT #JMTPROR #rotoboss